چکیده
در سیستم های محاسباتی پیچیده، واحد پردازش با دستگاه هایی با ابعاد کوچک تر برخورد می کند که به خطا های گذرا حساس هستند. یک خطای گذرا در یک مدار ناشی از نویز الکترومغناطیسی، اشعه های بیرونی، تداخلات و نویز منبع تغذیه می باشد. در طول آزمایش آفلاین بسیار دشوار است که این خطاها را شناسایی کنید. از این رو یک منطقه کارآمد تحمل پذیری خطای تمام جمع کننده برای تست و ترمیم خطای گذرا و دائم در تک و چند شبکه که بوجود می آیند، ارائه شده است. علاوه بر این، معماری پیشنهادی همچنین می تواند خطاهای دائمی را شناسایی و تعمیر کند. این طراحی دارای سربارهای سخت افزاری بسیار پایین نسبت به معماری سخت افزار سنتی است. علاوه بر این، طرح پیشنهادی نیز در مقایسه با طرحهای موجود، امکان تشخیص و اصلاح خطاهای بالاتر را فراهم می کند.
کلمات کلیدی: جمع کننده، تک خطایی، دو خطایی، جمع کننده خود چک کننده ، تحمل پذیری خطا، قابلیت اطمینان
Real-time fault tolerant full adder design for critical applications
ABSTRACT
In the complex computing system, processing units are dealing with devices of smaller size, which are sensitive to the transient faults. A transient fault occurs in a circuit caused by the electromagnetic noises, cosmic rays, crosstalk and power supply noise. It is very difficult to detect these faults during offline testing. Hence an area efficient fault tolerant full adder for testing and repairing of transient and permanent faults occurred in single and multi-net is proposed. Additionally, the proposed architecture can also detect and repair permanent faults. This design incurs much lower hardware overheads relative to the traditional hardware architecture. In addition to this, proposed design also provides higher error detection and correction efficiency when compared to the existing designs.
Keywords: Adder, Single-fault, Double-fault, Self-checking adder, Fault tolerant, Reliability
مبلغ واقعی 121,158 تومان 5% تخفیف مبلغ قابل پرداخت 115,100 تومان